78
Descending
• Press and hold the Select (Side) button for 2 seconds to
access Dive Mode. The DOWN Arrow will appear
flashing (Fig. 78).
• Press and release the Select (Side) button to begin a
Descent at a rate of 5 feet (1.5 m) per real time second.
• Press and release the Select (Side) button during the
Descent to stop the Descent.
• During the Descent, pressing and releasing the Advance
(Front) button provides access to the Alternate Displays.
• Press and hold the Select (Side) button for 4 seconds to
access Time Acceleration. The small clock icon will
begin flashing (Fig. 79).
• Press and release the Select (Side) button to increase
Elapsed Dive Time 1 minute per real time second.
• Press and release the Select (Side) button during Time
Acceleration will restore normal time rate of one second
per real second.
• To exit Simulator operation at this time, press and holding
Both buttons simultaneously for 2 seconds to revert
operation to real Surface Mode. To make a Simulated
Ascent, continue as follows.
Fig. 78 -Simulated Descent
Fig. 79 -Time Acceleration
To Next Page
Loading...
