English-67
Installation is starting an update. To do
this press the Menu button and select
Installation>TKGS Installation>Start
update.
To use the update options of TKGS
TKGS feature keeps your satellite channel
lists up-to-date in three dierent ways.
Standby: While going into standby mode,
the TV controls the TKGS table version
number whether it is the last version or not.
If any changes are detected, TV starts to
update. On the next switch-on a message
will be displayed to inform the user about
the changes.
Background: When a channel is opened
which isn’t defined in the TKGS channel
lists, the TV controls the TKGS table ver-
sion number whether it is the last version or
not. If any changes are detected, TV starts
to update. When the update is completed
a message will be displayed to inform the
user about the changes.
Manual: An update can be started manually
any time. Press the Menu button. Highlight
Installation and press OK. In the sub menu
highlight TKGS Installation and press OK.
Than select Start Update and press OK.
NOTE: Do not turn o the TV while initial-
izing first time installation. Note that, some
options may not be available depending on
the country selection.
In the TKGS system, channels can be
blocked by the service provider and Audio/
Video transmission will not be available
from these channels.
Media Playback via USB Input
You can connect a 2.5” and 3.5” inch (hdd
with external power supply) external hard
disk drives or USB memory stick to your TV
by using the USB inputs of the TV.
IMPORTANT! Back up your files before
making any connections to the TV. Manu-
facturer will not be responsible for any file
damage or data loss. Certain types of USB
devices (e.g. MP3 Players) or USB hard disk
drives/memory sticks may not be compat-
ible with this TV. The TV supports FAT32
and NTFS disk formatting but recording will
not be available with NTFS formatted disks.
While formatting a USB hard disk that has
1TB (Tera Byte) or more file capacity, you
can experience problems with the format-
ting process. Do not repeatedly quickly
plug and unplug the drive. This may cause
physical damage to the USB player and
USB device itself. Do not pull out USB
module while playing a file.
Some USB harddisk drives might not be
supported
Using SatcoDX Feature
SatcoDX (optional): You can perform Sat-
coDX operations using the Satelite Settings
menu. In the SatcoDX menu, there are two
options regarding to the SatcoDx.
You can download or upload SatcoDX data.
In order to perform these functions a USB
device must be connected to the TV.
You can upload current services and related
satellites & transponders in TV, to a USB
device.
Additionally you can download one of the
SatcoDx files stored in USB device, to the
TV.
When you select one of these files, all ser-
vices and related satellites and transponders
in the selected file will be stored in the TV. If
there are any installed terrestrial, cable and/
or analog services, they will be kept and only
satellite services will be removed.
To Next Page
Loading...
