English-70
TV Menu Features and Functions
Mode
You can change the picture mode to suit your preference or requirements.
Picture mode can be set to one of these options: Cinema,Game,Dynamic
and Natural.
Contrast
Sets the lightness and darkness values of the screen.
Brightness
Sets the brightness value for the screen.
Sharpness
Sets the sharpness value for the objects displayed on the screen.
Colour
Sets the colour value, adjusting the colors.
Power Save
Mode
To set the Power Save Mode as Eco, Picture O and Disabled.
(When the Mode is Dynamic, Power Save mode is automatically set as
disabled.)
Backlight
(Optional)
This setting controls the backlight level. The backlight function will be inac-
tive if the Power Save Mode is set to Eco. The backlight cannot be activated
in VGA, Media Browser mode or while the picture mode is set to Game.
Noise Re-
duction
If the broadcast signal is weak and the picture is noisy, use the Noise Reduc-
tion setting to reduce the amount of noise.
Advanced Settings
Dyanmic
Contrast
You can change the Dynamic Contrast ratio to desired value.
Colour Temp
Sets the desired colour tone.
Picture Zoom
Sets the desired picture size from picture zoom menu.
Note: Auto (Only available in Scart mode with SCART PIN8 high voltage/
low voltage switching)
Film Mode
Films are recorded at a dierent number of frames per second to normal
television programmes. Turn this feature on when you are watching films to
see the fast motion scenes clearly.
Skin Tone
Skin tone can be changed between -5 and 5.
Colour Shift
Adjusts the desired colour tone.
RGB Gain
You can configure the colour temperature values using the RGB Gain
feature.
HDMI True Black
While watching from a HDMI source, this feature will be visible in the Picture
Settings menu. You can use this feature to enhance blackness in the picture.
Reset
Resets the picture settings to factory default settings.(Except Game Mode)
To Next Page
Loading...
Need help?
General
