Sega Sonic Allstarts - 3. LED Lighting Test and 4. AUDIT; LED Lighting Test Procedure; Audit System Operations

- 30 -
3.LED Lighting Test
Testing
1. Press and turn on the power in the same time to enter LED testing
mode. Release the test button until is displayed ”1” on the LED.
2.Check if the LED is displayed correctly.
3.When testing is finished you will enter into the standby function.
4.After AUTO test is finished, it will enter into standby function.
4.AUDIT
Press enter into audit system in standby function only.
Press then release, enter intoaudit 1
COUNT - IN
1 C X X X X X X
Press then release, enter intoaudit 2
COUNT - OUT
2 C X X X X X X
Press then release, enter intoaudit 3
SHIFT - IN
3 C X X X X X X
LED test function display
LED displays Company logo, from right to left.
LED display1 2 3 4 5 6 7 8 9,color test change from
redgreenthenorange.
Coin LED display1 2 3 4 5 6 7 8 9,color testred.
Record total received
Coins up to 999999 same as counter,
counter reset is not allowed.
Record total dispensed tickets
Tickets up to 999999 same as counter,
no counter reset is not allowed.
Record total received
Coins up to 999999,
counter reset is allowed.
XXXXXXX
X