OIL STRAINER CLEAN
The oil filtration on this engine is a two-stage filtration system.
The oil strainer (pre-filter) is designed to trap large foreign objects.
Replace the oil according to the Maintenance Schedule. Also use
Segway approved oil that is designed for 4-stroke engines.
The oil filter can be checked after the oil is discharged. If cleaning
is needed, please take the following steps:
1.
Remove 4 bolts.
2.
Remove the strainer cover, O-ring seal and strainer spring in
turn.
3.
Take out the oil strainer for cleaning.
4.
Strainer installation is reverse of the removal.
To Next Page
Loading...
Need help?
General
