Failure to remove all debris when replacing belts may result in
vehicle damage, loss of control and serious injury or death.
CVT DRIVE BELT
Check CVT drive belt in intervals specified in the maintenance chart.
If CVT belt is damaged, it should be replaced.
BELT REPLACEMENT/DEBRIS REMOVAL
When replacing drive belt, remove debris from pipes and clutches.
Removing drive belt
Stop vehicle engine before
replacement and allow vehicle to
cool fully.
1.
First remove the right cover of
the vehicle.
2.
Remove the CVT anti-ironing
board on the CVT.
3.
Remove the CVT cover bolt
and remove the CVT cover and
CVT cover sealing ring.
To Next Page
Loading...
