For E125S:
1.
Place the battery (a) in.
NOTE:
Before installation, make sure there are no foreign objects in the
battery compartment with two plugs inside.
2.
Push the battery (a) to the inner end.
6. Charge the Battery
1. Use the key to open the seat bucket
and pull the foot panel switch to
unlck it.
3. Connect the charging cable to the
charging port on the battery and then
plug into a power socket.
2.
Open the driver's footrest, which is also
the battery compartment lid, and take
out the battery.
*
The indicator on the battery charger
shows solid red when charging and
turns green when finished.
3.
Connect the battery plug on the corresponding
side.
4.
Place the battery (b) in the compartment.
5.
Connect the battery plug(s). * The battery (a) means the first battery; (b) is for
the second battery.
*
For how to charge the vehicle, see [
16
Charging Port] at page 8.
To Next Page
Loading...
