Powering-on and activation
a. Power on:
Option 1: Power on with the key [see
37
Ignition].
Option 2: Press the ON button on the remote
control [see Functions of the
Remote Control for details].
Option 1 Option 2
4.
Learn to Ride
a.
When powered on via the App, sit on the
cushion and retract the side stand.
b.
Press the Auto Key.
b. Activation:
Enable AirLock: Enable Bluetooth on your
phone, scan the QR Code on the dashboard to
download and install the app > register and log
in > click “Search device” > Connect. Follow
the instructions to bind your Segway eScooter.
c. The “Ready” indicator lights up. d. Squeeze the throttle inwards to go.
How to power on/lock the vehicle after activation
There are four ways to power on/lock the vehicle.
Option 1: Use the remote control: Press ON/OFF button to unlock and power on the vehicle; press the
lock button to power off and lock. [See Functions of the Remote Control for details]
Option 2: Use the key: Insert the key and turn it clockwise to ON position to power on or counterclockwise
to LOCK position to lock. [see Ignition]
Option 3: Press the Auto button [see Controller Switch]
Option 4: Via the Segway-Ninebot app as shown below:
1.
Press the On/Off button on the vehicle homepage.
5. Installation of Lithium-ion Battery
For E110SE / E110S:
NOTE:
Before installation, make sure there is no foreign object
in the battery compartment and there is only one plug inside.
2.
Press “Confirm” on the popped-up window.
3.
When the indicator on the dashboard is pre-light, press and hold the Auto button to power on/lock the
vehicle.
1.
Place the battery in.
2.
Connect the battery plug.
To Next Page
Loading...
Need help?
General
