120
MAINTENANCE,STORAGE AND TRANSPORTATION
CVT belt
Replace the CVT drive belt according to the specified time listed in
the vehicle maintenance schedule. If the belt is damaged, it should
be replaced.
When replacing the belt, clean the CVT housing pipe, clutch and
the engine compartment for debris.
!
WARNING
Failure to remove all debris when the belt is replaced can result
in vehicle damage, loss of control and serious injury or death
Stop the engine before replacement and allow the vehicle to cool
down.
1
CVT cover bolt
2
CVT cover
ćć
3
CVT cover seal
4
CVT belt replacement tool
1. Remove the CVT outer cover bolts, outer cover and the sealing ring.
2. Remove the handle on the CVT belt replacement tool, and
manually screw the CVT belt replacement tool into the thread
of the CVT driven wheel.
To Next Page
Loading...
