54
VEHICLE DEVICE
Parking brake
Whenever a person leaves the vehicle, the parking brake must be
turned on to put it in the parking system working status
1
Parking handle
2
Parking button
Turn on the parking brake:
When parking the car, first park the car on a suitable road, step on the
brake pedal to make the car stand still, and then hold the T-shaped
parking handle with your hand and pull it up until your foot releases
the brake The vehicle is still in a reliable stationary state when
pedaling, and the parking brake is turned on at this time.
Release the parking brake:
Press the lock button with your index finger, while holding the
T-shaped handle, rotate it 90 degrees clockwise, and push the
parking handle down to the bottom to release the parking.
!
CAUTION
When the driver leaves the vehicle, the parking brake of the vehicle
must be turned on
To Next Page
Loading...
