80
OPERATION
PRE-RIDE INSPECTION
Perform a pre-ride inspection before each ride to detect any
potential problem that could occur during operation. The pre-
ride inspection will help you monitor component wear and
deterioration before they become a problem.
Correct any problems that you discover to reduce the risk of a
breakdown or accident.Inspection Items
.
Item Note Page
Brake system/pedal
travel
Ensure proper operation P52
Brake fluid Ensure appropriate level P129
Front suspension
Check and lubricate if
necessary
P136
Rear suspension
Check and lubricate if
necessary
P136
Tire Check status and pressure p131
Wheel/fastener
Check to ensure the tightness
of fasteners
p134
Nut
、
bolt
、
fastener Check to make sure it's tight ——
Fuel Ensure appropriate level P50
Engine oil Ensure appropriate level P109
Coolant level Ensure appropriate level P126
Coolant pipe Check leakage ——
Throttle Ensure proper operation ——
Air intake prefilter Check ,clean
P138-
140
Front headlight Check operation P141
Brake light/taillight Check operation ——
To Next Page
Loading...
