122
MAINTENANCE,STORAGE AND TRANSPORTATION
SPARK PLUG
Refer to the specification below for the recommended spark plug
type and clearance specifications.
!
CAUTION
The use of anything but the recommended
spark plug can cause serious engine
damage. Always use the recommended
spark plugs or their equivalents.
Spark Plug
Model
NGK CPR7EA /
TORCH B7RTC
Spark Plug Gap 0.7-0.9 mm
Spark Plug Torque 8.8 ft. lbs. (12 N·m)
1. Remove the CVT clutch drain plug.
2. Wait for the water to drain out and reinstall the water drain plug.
2. Start the engine.
3. Increase the engine speed and maintain it for 10-15 seconds
to remove the excess moisture and dry the belt and CVT. DO
NOT fully open the throttle during this operation.
4. Shift gears to the low range and test for belt slippage.
5. If the belt still slips, repeat the process.
6. Visit your Segway Powersports dealer if your vehicle needs
service.
PP
To Next Page
Loading...
