74
OPERATION
Parking the vehicle
1. Stop the vehicle on a level surface. When parking inside a
garage or other structure, be sure that the structure is well
ventilated and that the vehicle is not close to any source of
flame or sparks, including any appliance with pilot lights.
2. Place the transmission in PARK.
3. Stop the engine.
4. Slowly release the brake pedal and make sure the
transmission is in PARK before exiting the vehicle.
5. Remove the ignition key to prevent unauthorized use.
Driving on Slippery Surfaces
Whenever riding on slippery surfaces such as wet trails or loose
gravel, or during freezing weather, follow these precautions:
1. Do not operate on excessively rough, slippery or loose terrain.
2. Slow down when entering slippery areas.
3. Engage 4X4 before wheels begin to lose traction.
NOTICE
Severe damage to drive train may occur if the 4X4 is engaged while
the wheels are spinning. Allow the rear wheels to stop spinning before
engaging 4X4, or engage 4X4 before wheels begin to lose traction.
4. Maintain a high level of alertness, reading the trail and
avoiding quick, sharp turns, which can cause skids.
5. Correct a skid by turning the steering wheel in the direction of
the skid. Never apply the brakes during a skid.
To Next Page
Loading...
