33
VEHICLE DEVICE
FRONT PANEL
Ignition Lock/Start Button
MODE1 MODE2
MODE1:
Ignition Lock
Turn the key to the position "ON": the vehicle is energized and the
electrical components of the vehicle can be used.
Turn the key to the position “OFF”: the whole vehicle circuit is
disconnected and the engine stops. When the switch is in the off
position, the key can be taken out of the switch.
Start Switch
Turn the key to the ignition switch "ON" position, Press the Engine
Start/Stop “
”
，
press the start switch, and the vehicle will start.
MODE2:
Turn the key to the position "ON": the vehicle is energized and the
electrical components of the vehicle can be used.
Turn the key to the "Start" position without loosening. Wait for 1.5 or 2
seconds before the engine starts(Do not exceed 4 seconds), and the
key will automatically return to the "ON" position.
Turn the key to the position “OFF”: the whole vehicle circuit is
disconnected and the engine stops. When the switch is in the off
position, the key can be taken out of the switch.
To Next Page
Loading...
