145
MAINTENANCE,STORAGE AND TRANSPORTATION
1. Place the vehicle on a level surface with the headlight
approximately 33 ft. (10 m) from a wall.
I W P
F P
2. Measure the distance from the floor to the center of the
headlights and mark the walls at the same height.
3. Apply the brakes. Start the engine. Turn on the headlights.
4. Observe the headlight aim. The most intense part of the
headlight beam should be aimed 9.5”
（
24 cm) below the
mark placed on the wall. Include the weight of a rider on the
seat while performing this step.
5. If a headlight needs adjustment, locate the adjustment screw
at the back of the headlight(see page 146).
To Next Page
Loading...
