91
OPERATION
• When the winch is in use, be sure to start the vehicle engine
and set the gear position to "N."
• When the winch is working, it will draw voltage, so you must
start the vehicle and step on the accelerator lightly to avoid
damage to the battery.
• If severe noise or vibration occurs during the use of the
winch, it must be stopped immediately
• When the winch is not used, please remove the controller.
!
WARNING
When releasing or retrieving the winch rope, both ends of the rope
must be left with sufficient
length to prevent the rope from being over-rolled in or out. When the
rope is retrieving, please maintain a certain tension so that the wire
can be retracted smoothly and can be wound tightly during retrieving.
!
WARNING
Always use the tow rope to pull the hook, do not hold the hook with
your hands. This is not only important when winding the wire rope, but
also when removing the wire rope from the winch under power.
To Next Page
Loading...
