2 [en] Quick Installation Guide
General Information
Purpose
The USB Deviceserver 'utnserver Pro’ makes non-network-ready USB devices
accessible via TCP/IP network.
For this purpose, the USB devices (e.g. hard disks, etc.) will be connected to the
USB ports of the utnserver Pro. Then the UTN (UTN = USB to Network)
functionality and the corresponding software tool 'SEH UTN Manager' establish
a virtual USB connection between USB device and client. The USB device can be
used as if it were connected locally.
Scope of Supply
Check the package content before getting started:
UTN server Deviceserver 'utnserver Pro'
Quick
Installation
Guide
The Quick Installation Guide provides a brief
description of the installation of the utnserver
Pro.
(This document)
Power pack External power pack
To Next Page
Loading...
