Time zone adjustment
The time zone where you are is localized to adjust the watch to
the
precise current time by just one button operation anywhere
in the world.
* DST (daylight saving time or “summer time”) is set manually
→ How to adjust the time zone P. 20
* Failure or success of reception depends on the reception environment. → Place where GPS signals can be easily
received/Place where GPS signals cannot be received P. 16
* Even if reception was successful, DST (daylight saving time or “summer time”) is not set automatically. Please set
manually.
→ How to perform manual time difference setting (selection) P. 23
*
GPS signal reception consumes considerable energy.
Expose the watch to light frequently, and charge the watch so that the energy level is “middle” or “full”.→ How to
charge the watch P. 14
(If the energy level is “low”, reception will not begin even if GPS signal reception is operated.)
→ Check the charging status P. 13
Precautions on time zone adjustment
When time zone correction is performed near a border between time zones, the time for
the neighboring time difference (time zone) may be displayed.
In
some areas the boundaries observed by the watch may not exactly correlate to the actual
time zone markers on the land. This does not indicate a malfunction.
In this case, please set (select) the time difference manually.
→ How to perform manual time difference setting (selection) P. 23
When the time zone is adjusted while traveling on land, avoid time zone boundaries to carry
out time zone adjustment in the representative cities in the time zone whenever possible.
When using the watch near a time zone border, be sure to confirm the time and set (select)
the time difference manually as necessary.
To adjust the time zone and time by GPS signal reception (Time Zone Adjustment)
19
4
BASIC OPERATION (HOW TO SET THE TIME/HOW TO RECEIVE GPS SIGNALS, ETC.)
ASTRON 3X22 GPS SOLAR
To Next Page
Loading...
Need help?
General