Some bands are provided with an adjustable three-fold
clasp.
If the clasp of the watch you purchased is as follows,
please refer to the following instructions.
1
Press the push buttons on both sides of
the flap; pull the buckle up. The band will
automatically come out of the loop.
Fixed loop
Movable loop
Buckle
Flap
Push button
2
Place
the tip of the band into the movable
loop and fixed loop, and fasten the clasp
by pressing the frame of the buckle.
1
Press the push buttons on both sides of
the flap; pull the buckle up. The band will
automatically come out of the loop.
Fixed loop
Movable loop
Buckle
Flap
Push button
2
Press the push buttons again to unfasten
the flap.
3
Pull the pin out of an adjustment hole of
the band. Slide the band to adjust its
length
and find an appropriate hole. Place
the pin into the hole.
Pin
Adjustment hole
4
Fasten the flap.
●How to wear or take off the watch ●How to adjust the length of the band
* The above illustrations are provided as examples. Some details may differ depending on the model.
How to use an adjustable three-fold clasp
33
6
TO PRESERVE THE QUALITY OF YOUR WATCH
ASTRON 3X22 GPS SOLAR
To Next Page
Loading...
Need help?
General