Seiko Astron SSJ009J User Manual

How to manually set the time
• When
using the watch again under a condition in which the watch is able to receive GPS signals,
receive GPS signals to set the time.
• When adjusting the time, the date will also be adjusted.
1
Pull out the crown to the second
click
The seconds hand will move to the 0-second position.
012
Pull out
the crown to
the second
click
2
Press Button B continuously for 6
seconds, then release when the seconds
hand moves to the 0-second position
* 3 seconds after pressing Button B, the seconds hand
will move to the 18-second position. Please continue
pressing the button.
The seconds hand moves to stop at the 0-second
position.
The watch enters the manual time setting mode.
012
Press for
6
seconds
* When the watch enters the manual time setting
mode, the reception result will be displayed as
“N”,
since the reception results data will be lost.
3
Turn the crown to set the time
Turn the crown clockwise to
advance the time.
Turn the crown counterclockwise
to set back the time.
Turn quickly to move
continuously.
Turn again to stop
moving.
* When it has moved continuously for 12 hours, it will
stop.
Turn the crown to continue setting.
*
The point in which the date changes is at 0:00 AM
(12:00 PM). Set the time taking into consideration
AM or PM.
4
Push the crown back in
(simultaneously with a time signal)
Operation has been completed.
The watch resumes its normal movement.
012
Push
back in
* Even if GPS signals cannot be received, the watch can be used with the same accuracy as a normal quartz watch. (at loss/gain ±15 seconds per month on average)
*
If the watch receives GPS signals after manual time setting, it displays the received time.
39
7
TROUBLESHOOTING
ASTRON 3X22 GPS SOLAR

Seiko Astron SSJ009J Specifications

General

Brand	Seiko
Model	Astron SSJ009J
Category	Watch
Language	English