Sekonic L-508 CINE ZOOM MASTER - L-508 Cine BASIC OPERATION; CINE MODE AND STILL MODE

L-508 Cine BASIC OPERATION (Additional operation to L-508)
1. Cine mode and Still mode
L-508Cine has Cine and Still modes which are selectable,. In Cine mode,
Foot Candle/Lux/Foot Lambert readouts and Shutter Angle Setting are
available in addition to the functions for still photography for ambient light. In
Still mode, standard functions for still photography are available for ambient
light and flash light.
How to switch Cine mode or Still mode.
1. Remove the Battery cover latch.
2. Slide the DIP switch #4 to "CINE ON" position.
Cine mode - Incident mode
When the Cine mode and Incident mode is selected, the following measuring
modes will be available. To select each mode, turn the Set/change dial while
holding down the MODE button.
FC
Foot Candle
FC +T/F
FC: Foot Candle
T: Shutter speeds or Cine speeds (Frames per second)
F: F/stop, dot on analog scale
LUX
Lux
LUX + T/F
Lux
T: Shutter speeds or Cine speeds (Frames per second)
F: F/stop, dot on analog scale
-1-