Sekonic L-508 CINE ZOOM MASTER - Cine Mode - Spot Reflected Mode

1. Cine mode and Still mode
T + F (Shutter speeds priority)
T: Shutter speeds or Cine speeds (Frames per second)
F: F/stop in digital and dot on analog scale
EV + T/F
EV
T: Shutter speeds or Cine speeds (Frames per second)
F: F/stop, dot on analog scale
To display “EV+T/F” the DIP switch “F/No./ EV” should be
on position.
Cine mode - Shot reflected mode
When the Cine mode and Spot reflected mode is selected, the following
measuring modes will be available. To select each mode, turn the
Set/change dial while hold down the MODE button.
FL
FL: Foot Lambert
FL+T/F
FL: Foot Lambert
T: Shutter speeds or Cine speeds (Frames per second)
F: F/stop, dot on analog scale
T + F (Shutter speeds priority)
T: Shutter speeds or Cine speeds (Frames per second)
F: F/stop in digital and dot on analog scale
EV + T/F
EV
T: Shutter speeds or Cine speeds (Frames per second)
F: F/stop, dot on analog scale
To display “EV+T/F” the DIP switch “F/No./ EV” should be
on position.
-2-