2
Introduction
Congratulations on the purchase of your new self-tacking jib system.
This manual cover assembly and installation for the Seldén self-tacking system 22.
Please read the entire manual before assembly and use of the product, and keep it available
for future references.
Safety precautions
Dimensioning of the system
Self-tacking jib system 22 has a maximum working load of 700 kg.
The key to a properly working and safe installation is correct dimensioning in relation to the boat the
products shall be used for. Seldén provides dimensioning guidelines in catalogues, leaets and on
the website. If there are any questions about selecting the right product, please consult an authorized
Seldén dealer. All dealers are listed at www.seldenmast.com and divided in categories describing their
competence. For Self-tacking jib system 22 we recommend dealers in the category “Advanced Technical
Installations”.
This symbol indicates a delicate moment in the assembly or a technical advice.
This symbol indicates a potential hazardous situation which, in the event of failure,
can lead to damages to property, personal injury or death.
To Next Page
Loading...