3
508.366.1488 | www.semshred.com
Important Safety Procedures
Your new SEM Model 2SSD incorporates powerful, heavy duty cutting mechanisms. Serious and permanent injury
may result if proper precautions are not followed.
1. This equipment should never be operated by children or individuals that are untrained or
incapable of understanding these safety precautions.
2. Do not reach into the feed opening for any reason. Never insert fingers, hands, other
extremities, or objects not meant to be crushed into the feed opening.
3. Do not operate or come into close proximity to this equipment wearing loose clothing, neckties,
dangling jewelry, or long hair which may become entangled in the cutting chamber.
4. Maintenance or repair of this equipment should be performed only by trained,
authorized service personnel.
5. Always disconnect electric power (unplug) before removing or opening any cover or
other panels providing access to the internal mechanisms.
6. If you over feed the shredder or have an emergency and need to shut down the
machine, press the red “Emergency Stop” button on the left side of the machine or
open the collection bin door.
7. SEM recommends that machine operators wear safety glasses, hearing protection, a
mask, and if doing maintenance or opening the cutting chamber, cut resistant gloves. It
is up to each customer to determine the PPE for their individual site.
To Next Page
Loading...
