Sena 20S EVO - 6 Pairing with Selective Profile: A2 Dp Stereo or Handsfree; A2 DP Stereo Music Only

24
20S EVO
Parallel Connection of SR10 and Mobile Phone
by Bluetooth Second Mobile Phone Pairing
Smart Phone
Two-way Radio
20S EVO
GPS
Sena SR10
Radar Detector
HFP
+
A2DP
Mobile Phone
Pairing
Second Mobile
Phone Pairing
HFP
Wired
Connection
Wired
Connection
Wired
Connection
6 PAIRING WITH SELECTIVE PROFILE:
A2DP STEREO OR HANDSFREE
If you have a MP3 stereo music phone such as a smartphone, sometimes
you may need to selectively use the 20S EVO for A2DP stereo music
only or for mobile phone handsfree only. These instructions are for
advanced users who want to pair the 20S EVO to their smartphones
only with one selective prole: A2DP stereo for music or HFP for phone
calls.
If you have previously paired a mobile phone to the 20S EVO, you
must clear the previous paring list on both devices; the mobile phone
and 20S EVO. To clear the pairing list on 20S EVO, please do a factory
reset or follow the pairing list clearing procedure described in this
manual. To clear the pairing list on the mobile phone, please refer to
the mobile phone manual. For most smartphones, delete the 20S EVO
from the list of Bluetooth devices in the settings menu.
6.1 A2DP Stereo Music Only
1. Turn on the headset and press the Phone Button for 5 seconds
until the LED ashes red and blue alternately and you hear
multiple beeps.