Sena 20S EVO - Universal Intercom Pairing; Exit Voice Configuration Menu

56
20S EVO
21.17 Universal Intercom Pairing
Voice Prompt
“Universal intercom pairing”
Factory Default N/A
Execute Tap the Phone Button
To enter into Universal Intercom Pairing mode, rotate the Jog Dial until
you hear a voice prompt, “Universal intercom pairing”. Then press
the Phone Button to enter into Universal Intercom Pairing mode. The
headset will automatically exit from the conguration menu. Please
refer to section 18.1 for details on Universal Intercom.
21.18 Exit Voice Conguration Menu
Voice Prompt
“Exit conguration”
Factory Default N/A
Execute Tap the Phone Button
To exit voice conguration menu and get back to stand-by mode,
rotate the Jog Dial until you hear a voice prompt saying “Exit
conguration”, and tap the Phone Button to conrm. Tapping the Jog
Dial is not available for this setting.
Rotate Jog Dial Tap Phone Button Tap Jog Dial
Speed Dial Execute N/A
Audio Multitasking Enable Disable
Intercom-audio Overlay
Sensitivity
Execute N/A
Navigation App Support Enable Disable
Audio Boost Enable Disable
Motion Sensor Sensitivity Execute N/A
VOX Phone Enable Disable
HD Intercom Enable Disable
Eight-way Intercom Enable Disable
Voice Prompt Enable Disable
FM Station Guide Enable Disable
Sidetone Enable Disable
Advanced Noise Control Enable Disable
Delete All Pairings Execute N/A
Remote Control Pairing Execute N/A
Universal Intercom Pairing Execute N/A
Exit Conguration Execute N/A
Voice Conguration Menu & Button Operations