Sena 20S EVO - Page 46

46
20S EVO
3. The non-Sena Bluetooth headset (D) may join the three-way
intercom by making an intercom call to the 20S EVO (C).
(B)
(D)
(A)
(C)
4. Now two 20S EVO headsets (A & C) and two non-Sena Bluetooth
headsets (B & D) are connected with the four-way Universal Intercom.
(B)
(D)
(A)
(C)
You may disconnect a four-way Universal Intercom using the same
way as you do in a normal four-way intercom. Please refer to section
15.2.4, “End Multi-way Intercom”.
18.4.2 Four-way Universal Intercom Case 2
Three 20S EVO headsets (A, C and D) and one non-Sena Bluetooth
headset (B).
The procedure is the same as case 1 described in section 18.4.1.
(B)
(D)
(A)
(C)