Sena 5S - Installing the Headset on Your Helmet; Helmet Installation

5S Motorcycle Bluetooth Communication System | 8
2. INSTALLING THE HEADSET ON YOUR
HELMET
2.1 Helmet Installation
2.1.1 Using the Clamp Unit
1. Loosen the two screws on the back plate of the clamp unit with the
included Allen wrench.
1
2
2. Insert the back plate of the clamp unit between the internal padding
and external shell of the left side of the helmet.
3. Tighten the two screws until the clamp unit is fastened firmly to the
helmet.
1
2
4. Attach the main unit to the clamp unit until you hear a click.
CHAPTER