Sena 5S - Page 9

5S Motorcycle Bluetooth Communication System | 9
2 INSTALLING THE HEADSET ON YOUR HELMET
2.1.2 Using the Glued Surface Mounting Plate
If you cannot install the clamp unit on the helmet, you can use the glued
surface mounting plate to attach the clamp unit to the surface of the
helmet.
1. Attach adhesive tape of the glued surface mounting plate to the
helmet.
2. Make sure that the glued surface mounting plate sticks on the helmet
firmly. Maximum adhesion occurs after 24 hours.
3. Attach the main unit to the glued surface mounting plate until you
hear a click.
2.2 Installing the Speakers
1. Attach the hook and loop fasteners for speakers to ear pockets inside
the helmet.