Sena ACS 10 - Pairing Additional Devices

ACS10 Motorcycle Bluetooth
®
Communication System | 16
4 PAIRING THE HEADSET WITH OTHER BLUETOOTH DEVICES
4.2 Second Mobile Phone Pairing - Second Mobile
Phone, GPS, and SR10
1. Press and hold the Center Button for 15 seconds.
=
15s
HOLD
“ Configuration
Menu”
2. Tap the (+) Button.
=
1x
TAP
Blinking
“ Second mobile
phone pairing”
3. Select ACS10 in the list of Bluetooth
devices detected. If your mobile
phone asks for a PIN, enter 0000.
Device B
Pi
Bluetooth
ACS10
4.3 GPS Pairing
1. Press and hold the Center Button for 15 seconds.
=
15s
HOLD
“ Configuration Menu”
2. Double tap the (+) Button.
=
2x
TAP
Blinking
“ GPS pairing”
3. Select ACS10 in the list of devices
detected. If your Bluetooth device
asks for a PIN, enter 0000.
Device B
Pi
Bluetooth
ACS10
Note: If you pair your GPS device via GPS Pairing, its instruction will
interrupt your Mesh Intercom conversations.