ACS10 Motorcycle Bluetooth
®
Communication System | 35
10 CONFIGURATION SETTING
10.1.1 Delete All Pairings
You can delete all Bluetooth pairing information of the headset.
10.1.2 Remote Control Pairing
You can remotely control the headset using Sena Remote Control
devices (sold separately).
1. Turn on the headset and the Remote Control device.
2. Execute Remote Control Pairing.
3. Enter pairing mode in the Remote Control device. The headset will
automatically connect with the Remote Control device in pairing
mode.
10.2 Software Configuration Setting
You can change the settings of the headset through the Sena Device
Manager or the Sena Utility App.
Sena Utility Sena Device Manager
To Next Page
Loading...
