ACS10 Motorcycle Bluetooth
®
Communication System | 38
10 CONFIGURATION SETTING
10.2.8 Voice Prompts (Default: Enable)
You can disable voice prompts by software configuration settings, but
the following voice prompts are always on.
- headset configuration settings menu
10.2.9 Sidetone (Default: Disable)
Sidetone is audible feedback of your own voice. It helps you to naturally
speak at the correct level according to varying helmet noise conditions.
If this feature is enabled, you can hear what you are speaking during an
intercom conversation or a phone call.
10.2.10 Advanced Noise Control™ (Default: Enable)
When Advanced Noise Control is enabled, the background noise
is reduced during an intercom conversation. When it is disabled, the
background noise is mixed with your voice during intercom.
10.2.11 Audio Multitasking™ (Default: Disable)
Audio Multitasking allows you to hear the audio from two features
simultaneously. When Audio Multitasking is enabled, phone calls, GPS
instructions and intercom conversations can be overlaid with audio from
the music or GPS app instructions from a smartphone in the background
with reduced volume. Increasing or decreasing the volume of the audio
in the foreground will also increase or decrease the volume of the
overlaid audio in the background. The volume of the foreground audio
can be adjusted using the headset. How much background audio that
is heard can be adjusted using the Sena Utility App. HD Intercom, HD
Voice and Audio Source Priority become disabled temporarily when
Audio Multitasking is enabled.
To Next Page
