ACS10 Motorcycle Bluetooth
®
Communication System | 40
11. TROUBLESHOOTING
Please visit sena.com for more troubleshooting information.
• Customer Support: sena.com
11.1 Fault Reset
When the headset is not working properly, you can easily reset the unit:
1. Locate the Pinhole Fault Reset Button next to the Sena logo.
2. Gently insert a paper clip into the hole and press and Pinhole Fault
Reset Button with light pressure.
=
FAULT
RESET
3. The headset will shut down.
Note: Fault Reset will not restore the headset to factory default
settings.
11.2 Factory Reset
To erase all of your settings and start fresh, the headset can be restored
to factory default settings using the Factory Reset feature.
1.
=
15s
HOLD
“ Configuration menu”
2.
=
2x
TAP
“ Factory Reset”
3.
=
1x
TAP
“ Headset reset,
good-bye”
CHAPTER
To Next Page
Loading...
