Sena ACS 10 - Using the Button

ACS10 Motorcycle Bluetooth
®
Communication System | 23
7 BLUETOOTH INTERCOM
6. Click the Confirm Button and check that your friend (B) is paired with
you (A) correctly.
7. Repeat steps 4-6 to pair with Intercom Friends (C) and (D).
Note: The Smart Intercom Pairing (SIP) is not compatible with Sena
products that use Bluetooth 3.0 or below.
7.1. 2 Using the Button
YOU
B
A
1. Users (You, B) enter into Intercom Pairing.
5s
HOLD
Blinking
“ Intercom Pairing”
2. Tap the Center Button on either headset.
1x
TAP
Turns blue
Confirms intercoms are paired
A
B
YOU
3. Repeat the steps above to pair with other headsets (C and D).