Sena EXPAND - 4.4 Media Selective Pairing; 4.5 Assigning Speed Dial

13
EXPAND
English
4.4 Media Selective Pairing
Voice Prompt
“Media selective pairing”
Factory Default N/A
To go into media selective pairing mode, press the
(+) Button or the (-) Button until you hear the voice
prompt, “Media selective pairing”. Please refer
to section 6.2 for more details on media selective
pairing. If you press the (+) or (-) Button, you can exit
from the media selective pairing mode.
4.5 Assigning Speed Dial
Voice Prompt
“Speed dial”
Factory Default N/A
Execute Tap the Center Button
1. To assign a phone number as a speed dial, tap the
(+) Button or the (-) Button until you hear a voice
prompt, “Speed dial”.
2. Tap the Center Button, and you will hear a voice
prompt, “Speed dial one” and “Phone connected”.
3. Tap the (+) Button or the (-) Button to select one
of three speed dial numbers and you hear a voice
prompt, “Speed dial (#)”.
4. Call a phone number you want to assign and you
will hear a voice prompt, “Save speed dial (#)”.
The phone number is automatically assigned to
the selected speed dial number. Then the phone
call will hang up before being connected.
5. To exit the menu, tap the (+) Button or the (-)
Button until you hear a voice prompt, “Cancel”,
andtaptheCenterButtontoconrm.Youwillthen
hear a voice prompt, “Cancel”. If any button is not
pressed within 1 minute, the Sena Expand will exit
theconguration menuandgoback tostand-by
mode.
Note:
1. After assigning a phone number to one of three speed
dials, you can continually assign another phone number to
the rest of two speed dials.
2.
You can assign phone numbers to speed dials in your PC.
Please visit the Sena Bluetooth web site at www.sena.com
for more information.