Sena EXPAND - 4.8 Reset to Factory Default Setting

EXPAND
14
4.6 Enabling/Disabling Voice Prompts
Voice Prompt
“Voice prompt”
Factory Default Enable
Enable / Disable Press the Center Button
You can disable voice prompts by conguration
setting, but the following voice prompts are always
on.
- Voicepromptsforcongurationsettingmenu
- Voice prompts for battery level Indicator
- Voice prompts for factory reset
4.7 Delete All Bluetooth Pairing
Information
Voice Prompt
“Delete all pairings”
Factory Default N/A
Enable / Disable Press the Center Button
To delete all Bluetooth pairing information on the
Sena Expand, press the (+) Button or the (-) Button
until you hear the voice prompt, “Delete all pairings”.
PresstheCenterButtontoconrm.
4.8 Reset to Factory Default Setting
Voice Prompt
“Factory reset”
Factory Default N/A
Execute Press the Center Button
To restore factory default settings on the Sena
Expand, press the (+) Button or the (-) Button until
you hear the voice prompt, “Factory reset”. Press the
CenterButtontoconrm.TheSenaExpandpowers
off with a voice prompt, “Headset reset, goodbye”.
4.9 ExitVoiceCongurationMenu
Voice Prompt
“Exit conguration”
Factory Default N/A
Execute Press the Center Button
To exit voice conguration menu and get back to
stand-by mode, press the (+) Button or (-) Button
until you hear the voice prompt, “Exit conguration”.
PresstheCenterButtontoconrm.