Sena EXPAND - 9.2 Pairing with Other Sena Headset Models for Intercom Conversation; 9.3 Two-way Intercom

23
EXPAND
English
5. The intercom pairing queue is ‘Last-Come, First-
Served’. If a headset has multiple paired headsets
for intercom conversations, the last paired headset
is set as the first intercom friend. The previous
intercom friend becomes the second intercom
friend, and third intercom friend.
Note:
For example, after the pairing procedures listed above, headset
D is the first intercom friend of headset A. Headset C is the
second intercom friend of headset A, and headset B is the third
intercom friend of headset A.
9.2 Pairing with Other Sena Headset
Models for Intercom Conversation
The Sena Expand can be paired with all other Sena
headset models for intercom conversation. Please
follow the same procedure as above to pair with
these headset models.
9.3 Two-way Intercom
9.3.1 Start and End Two-way Intercom
1. You can start a one-on-one intercom conversation with
any intercom friend by pressing the Center Button:
Single pressing to intercom with the rst intercom
friend, double pressing for the second intercom friend,
or triple pressing for the third intercom friend.
2. To terminate a one-on-one intercom conversation,
single press the Center Button. This will end the
intercom conversation.
1
st
intercom
friend
2
nd
intercom
friend
3
rd
intercom
friend
Start
intercom
Press once Press twice
Press three
times
End
intercom
Press once
Start & End Two-way Intercom