Sena Pi - Pairing the Headset with Other Bluetooth Devices; Phone Pairing Procedures

pi Bluetooth Communication Headset for Helmets | 10
4. PAIRING THE HEADSET WITH OTHER
BLUETOOTH DEVICES
When using the headset with other Bluetooth devices for the first time,
they will need to be “paired.” This enables them to recognize and
communicate with one another whenever they are within range.
The pairing operation is required only once for each Bluetooth device.
The headset can pair with multiple Bluetooth devices such as a mobile
phone, GPS, or MP3 player via Mobile Phone Pairing and Second
Mobile Phone Pairing.
4.1 Phone Pairing
There are three ways to pair the phone.
4.1.1 Initially Pairing the pi
The headset will automatically enter the phone pairing mode when you
initially turn on the headset or in the following situation:
• Rebooting after executing Factory Reset.
①
Press and hold the
(+) Button and the (-) Button
for 1 second.
Blinking
“Phone Pairing”
②
Select pi in the list of Bluetooth
devices detected.
Device B
Pi
Bluetooth
pi
Note:
• The phone pairing mode lasts for 3 minutes.
• To cancel pairing, tap the (+) Button or (-) Button.
CHAPTER