pi Bluetooth Communication Headset for Helmets | 16
7. UNIVERSAL INTERCOM
Universal Intercom allows you to have Two-way intercom conversations
with users of non-Sena Bluetooth headsets. Non-Sena Bluetooth
headset can be connected to the Sena headset if they support the
Bluetooth Hands-Free Profile (HFP). You can pair the headset with only
one non-Sena headset at a time. The intercom distance depends on the
performance of the headset to which it’s connected. When a non-Sena
headset is paired with the headset, if another Bluetooth device is paired
via Second Mobile Phone Pairing, it will be disconnected.
7.1 Universal Intercom Pairing
①
Press and hold the
(+) Button for 10 seconds
to enter the configuration
menu.
“Configuration menu”
②
Double tap the (+) Button.
“ Universal intercom
pairing”
③
Tap the (-) Button to enter into Universal Intercom Pairing mode.
④
Put the non-Sena Bluetooth headset in Hands-free Pairing Mode. The
headset will automatically pair with a non-Sena Bluetooth headset.
7. 2 Two-Way Universal Intercom
You can initiate the Universal Intercom connection with non-Sena
Bluetooth headsets using the same intercom connection method as you
would between other Sena headsets.
A
YOU
Non-Sena
Headset
You may start/end a Two-Way Universal Intercom using the same way
as you do in a normal Two-Way Intercom. Please refer to section 6.2,
“Two-Way Intercom”.
CHAPTER
To Next Page
Loading...
