Sena R1 EVO - Pairing the Bluetooth System with Other Bluetooth Devices; Phone Pairing

R1 EVO Smart Cycling Helmet | 15
3. PAIRING THE BLUETOOTH SYSTEM
WITH OTHER BLUETOOTH DEVICES
The pairing operation is required only once for each Bluetooth device.
3.1 Phone Pairing
1. Press and hold the (+) Button and Center Button for 10 seconds
when the R1 EVO is turned off.
=
10s
HOLD
2. With your mobile phone in Bluetooth-pairing mode, select Sena R1
EVO in the list of devices detected.
3. If your mobile phone asks for a PIN, enter 0000.
CHAPTER