Sena R1 EVO - Starting Mesh Intercom; Channel Setting

R1 EVO Smart Cycling Helmet | 19
6 MESH INTERCOM
6.2 Starting Mesh Intercom
When Mesh Intercom is enabled, the R1 EVO will automatically
connect to nearby R1 EVO users and allow them to talk to each other
by pressing the Center Button.
Mesh Intercom On
=
1x
TAP
“Mesh intercom on”
Mesh Intercom Off
=
1x
TAP
“Mesh intercom off”
6.3 Mic Enable/Disable (Default: Enable)
Users can enable/disable the microphone when communicating in a
Mesh Intercom.
Enable/Disable the Microphone
=
1s
HOLD
6.4 Channel Setting (Default: 1)
If the Mesh Intercom communication experiences interference because
other groups are also using channel 1, change the channel. You can
select one of 1 to 9 channels.
1. Enter into the Channel Setting.
=
2x
TAP
“Channel setting, 1”