Sena SF1 User Manual

SF Series
42
14.1 Mobile Phone Pairing
Voice Prompt
“Phone pairing”
Factory Default N/A
To go into mobile phone pairing mode, tap the (+) Button or the (-)
Button until you hear the voice prompt, “Phone pairing”. Please refer
to section 5.1, “Mobile Phone Pairing - Mobile Phone, Bluetooth Stereo
Device” for details on mobile phone pairing. If you tap the (+) Button
or the (-) Button, you can exit from the phone pairing mode.
14.2 Second Mobile Phone Pairing
Voice Prompt
“Second mobile phone
pairing”
Factory Default N/A
To go into second mobile phone pairing mode, tap the (+) Button or
the (-) Button until you hear the voice prompt, “Second mobile phone
pairing”. Please refer to section 5.2, “Second Mobile Phone Pairing -
Second Mobile Phone, GPS, and SR10” for details on second mobile
phone pairing. If you tap the (+) Button or the (-) Button, you can exit
from the second mobile phone pairing mode.
14.3 GPS Pairing
Voice Prompt
“GPS pairing”
Factory Default N/A
To go into GPS pairing mode, tap the (+) Button or the (-) Button until
you hear the voice prompt, “GPS pairing”. Please refer section 6.3.1,
“GPS Pairing” for details on GPS pairing. If you tap the (+) Button or
the (-) Button, you can exit from the GPS pairing mode.
14.4 Phone Selective Pairing
Voice Prompt
“Phone selective pairing”
Factory Default N/A
To go into phone selective pairing mode, tap the (+) Button or the (-)
Button until you hear the voice prompt, “Phone selective pairing”.
Please refer to
section 5.3.2, “HFP for Phone Call Only” for details on
phone selective pairing. If you tap the (+) Button or the (-) Button, you
can exit from the phone selective pairing mode.

Sena SF1 Specifications

General

Bluetooth Version	Bluetooth 4.1
Talk Time	Up to 13 hours
Battery Charging Time	1.5 hours
Operating Temperature	-10°C to 55°C
Weight	35 g (1.2 oz)
Profiles	HFP, HSP, A2DP