FN55AX
18 Gauge Brad Nailer
NFE06E Revised March 6, 2013 (Replaces 12/5/11) © 2013 by SENCO Brands, Inc. Cincinnati, Ohio 45245—U.S.A.
DANGER:
The Fusion tool is charged with compressed air in a
factory sealed chamber. DO NOT attempt to open the
air chamber supported within the tool housing. The
driver assembly (YK0799EU) contains no user-
serviceable parts. Major components such as the
piston/driver assembly, gearbox, piston stop and guide
body are all part of the drive assembly.
•Deliberate tampering with the drive assembly may
result in the release of the driver.
•Any repair or upgrade requiring access to the
pressure chamber should be handled by an authorized
Senco dealer or service center.
To Next Page
Loading...
