EW-D ASA antenna splitter
206
▷ Plug the hollow jack plug of the power supply unit into the
DC in socket of the antenna splitter.
▷ Pass the cable of the power supply unit through the strain
relief.
▷ Connect one end of the power cord to the power supply unit
and the other end to the wall socket.
To completely disconnect the EW-D ASA antenna splitter
from the power supply system:
▷ Unplug the power cable from the wall socket.
▷ Unplug the hollow jack plug of the power supply unit from
the DC in socket of the antenna splitter.
To Next Page
Loading...
