Sennheiser Evolution Wireless Digital Series - Rack Mounting Procedure

EW-D EM rack receiver
38
Outputting audio signals
The EW-D EM has a balanced XLR-3M output socket and an
unbalanced 6.3 mm jack output socket.
▷ Always use only one of the two output sockets.
To connect an XLR cable:
▷ Plug the XLR cable into the AF out Bal socket on the EW-D
EM.
To connect a jack cable:
▷ Plug the jack cable into the AF out Unbal socket on the EW-
D EM.