SENNHEISER ELECTRONIC GMBH & CO. KG
COMPONENT MAINTENANCE MANUAL
HMEC 26-SERIES
Page 10002
Mar 13/13
23-41-48
1. General
The Illustrated Parts List (IPL) illustrates and lists all assemblies and component parts for the Headset.
2. Material Arrangement
This IPL contains the following sections:
A. Introduction
The introduction contains all explanatory information for the individual sections as is necessary for
use of this IPL. The introduction further contains a list of all abbreviations used in the detailed parts
list as well as a list of all manufacturer codes together with manufacturer names and addresses.
B. Detailed Parts List
(1) The FIG and ITEM column lists the applicable illustration figure number on which the part is
shown, and the item number by which the part is found on the illustration. A dash before the
item number indicates that the part is not illustrated.
(2) The PART NUMBER column lists the original manufacturer's part number for each item in the
list.
(3) The AIRLINE STOCK NUMBER column is for airline internal use.
(4) The NOMENCLATURE column gives the name of each assembly or part. Detail parts of an assem-
bly are listed immediately after the assembly.
(a) The parts listed in this column are indented to show the relationship to other items:
1234567
Assembly or installation assembly (RF) number
Attaching parts for assembly or installation of RF
Assembly
* * *
Detail parts for assembly
Sub-assembly
Attaching parts for assembly
* * *
Detail parts for sub-assembly
Sub-sub assembly
Attaching parts for sub-sub-assembly
* * *
Detailed parts for sub-sub-assembly
(b) ATTACHING PARTS are listed immediately after the assembly which they attach, and at the
same indent. The * * * symbol follows the last item of the attaching parts group.
Oct 30/08
To Next Page
Loading...
