SENNHEISER ELECTRONIC GMBH & CO. KG
COMPONENT MAINTENANCE MANUAL
HMEC 26-SERIES
Page 4001
Jan 10/09
23-41-48
CLEANING
1. General
WARNING: USE ALL CLEANING AGENTS IN A WELL VENTILATED AREA. DO NOT BREATHE THE FUMES. DO
NOT LET THE AGENTS TOUCH YOUR SKIN. DO NOT USE FLUIDS THAT CAN RELEASE FLAMMABLE
FUMES NEAR AN OPEN FLAME.
WATER ENTERING THE HOUSING OF THE HEADSET CAN CAUSE A SHORT-CIRCUIT AND DAMAGE
THE ELECTRONICS.
NOTE:
ALWAYS OBEY THE STANDARD SHOP PRACTICES.
2. Tools, Fixtures, Equipment and Consumables
3. Cleaning of the Headset
A. Cleaning of plastic parts
(1) Do not use any solvents or cleaning agents. Use a soft, slightly damp cloth to clean the headset.
If the headset is very dirty, use a cloth dampened with mild, soapy water (not for the earpads).
MATERIAL SOURCE
Lintfree cloth Commercial
Mild soapy water Commercial
Table 4001
Cleaning materials
Jan 10/09
Cleaning
To Next Page
Loading...
