EW-DX EM 2 rack receiver
130
System -> Network menu item
In this menu item, you can configure the settings for the net-
work connection.
To open the Network menu item:
▷ In the System menu, navigate to the Network menu item.
▷ Press the jog dial to open the menu.
▷ Rotate the jog dial to navigate through the Network menu
and select the desired menu item.
You can make the following settings here:
Mode
• Auto: The network configuration is performed automatical-
ly.
• Manual: The network configuration can be performed man-
ually.
mDNS
You can enable or disable this option if you want to use mDNS
for automatic device detection in the network.
To Next Page
