EW-D SK bodypack transmitter
79
Meaning of the LEDs
The LINK and DATA LEDs on the top of the transmitter can in-
dicate the following information.
LINK LED
The LINK LED provides information about the status of the ra-
dio link between the transmitter and receiver, as well as status
information for the transmitter.
The LED is green:
▷ The link between the transmitter and receiver is estab-
lished.
▷ The audio signal is active.
The LED is yellow:
▷ The link between the transmitter and receiver is estab-
lished.
▷ The audio signal is muted.
The LED is flashing yellow:
▷ The link between the transmitter and receiver is estab-
lished.
▷ The audio signal is overdriven (clipping).
To Next Page
Loading...
