EW-DX EM 2 rack receiver
96
Meaning of the LEDs
The two LEDs on the front of the receiver indicate the follow-
ing information for channel 1 and channel 2.
The LED is green:
▷ The link between the transmitter and receiving channel is
established.
▷ The audio signal is active.
The LED is yellow:
▷ The link between the transmitter and receiving channel is
established.
▷ The audio signal is muted.
or
▷ No microphone module is mounted on the handheld trans-
mitter.
The LED is flashing yellow:
▷ The link between the transmitter and receiving channel is
established.
▷ The audio signal is overdriven (clipping).
To Next Page
Loading...
